Session Timeout; Ethernet Port; Ip Address; Default Gateway - ADTRAN Atlas 550 User Manual

S T
ESSION IMEOUT
M T
AX ELNET
S
ESSIONS
E P
THERNET ORT
P N
ORT AME
IP A
DDRESS
D
EFAULT
G
ATEWAY
S M
UBNET ASK
MAC A
DDRESS
61200305L1-1
Write security: 3; Read security: 5
Defines the number of seconds the terminal session must remain idle before
the session times out. You can enter zero to deactivate this option (the ses-
sion will never time out).
Write security: 3; Read security: 5
Defines the maximum number of Telnet sessions that can be active at the
same time. Enter a number between 0 and 100 in this field.
If you enter zero in this field, you will not be able to use Telnet. Only
enter zero if you want to completely lock outTelnet access.
Write security: 2; Read security: 5
Provides a way to configure various settings for the Ethernet port. The fol-
lowing options are available for review and editing:
Defines the name of the Ethernet port. You can leave this field blank.
Lists the address assigned to the base Ethernet port. This address is com-
posed of four decimal numbers, each in the range of 0 to 255, separated by
periods. This value is set to 0.0.0.0 by default. The IP address is used for the
Ethernet interface. Obtain the correct IP address from your LAN administra-
tor.
Defines or changes the default gateway. Enter the default gateway address
by entering a decimal number into the appropriate field and then pressing
to move to the next field. You will need a default gateway if the LAN
Enter
contains multiple segments. This address is composed of four decimal num-
bers, each in the range of 0 to 255, separated by periods. This value is set to
0.0.0.0 by default. Contact your LAN administrator for the appropriate ad-
dress.
Defines which part of a destination IP address contains the network number.
This address is composed of four decimal numbers, each in the range of 0 to
255, separated by periods. This value is set to 0.0.0.0 by default. This part of
the destination IP address is used along with the ATLAS 550 IP address to
determine which nodes must be reached through the default IP gateway.
Displays the system Ethernet Media Access Control (MAC) address. This
field is read-only.
ATLAS 550 User Manual
Chapter 6. System Control Terminal Menus
6-9