Udp Relay; Enabled; Specified; Relay Table - ADTRAN Atlas 550 User Manual

UDP R
ELAY
E
NABLED
S
TANDARD
S
PECIFIED
R T
ELAY ABLE
E
NABLE
IP
UDP P 1
ORT
UDP P 2
ORT
UDP P 3
ORT
61200305L1-1
Write security: 2; Read security:5
Configures the ATLAS 550 as a UDP (User Datagram Protocol) relay agent
to relay UDP broadcasts to a specified server IP address. UDP broadcasts
received on a given port may be relayed to, at most, one server.
Enables/disables UDP Relay. An entry in the UDP relay table can configure
the ATLAS 550 to relay either S
ports.
Relays the following UDP protocols: DHCP, TFTP, DNS, NTP, NBNS (Net-
BIOS Name Server), NBDG (NetBIOS DataGram), and BootP.
Relays datagrams received on any of the specified ports.
Sets server IP addresses and UDP relay ports.
Enables the R T
ELAY ABLE
Defines IP addresses that will receive the relay packet.
Specifies the UDP port to be relayed. Set to zero (0) to disable.
Specifies the UDP port to be relayed. Set to zero (0) to disable.
Specifies the UDP port to be relayed. Set to zero (0) to disable.
ATLAS 550 User Manual
ports or up to three S
TANDARD
. This option can also be set to D
Chapter 9. Router
PECIFIED
.
ISABLE
9-15