Figure 11-1. Dial Plan Menu; Chapter 11 Dial Plan; Overview - ADTRAN Atlas 550 User Manual

Chapter 11

OVERVIEW

61200305L1-1
Dial Plan
This chapter provides information on the D
on interface configurations for the following modules:
• Dual T1/PRI (network and user terminations, for PRI and RBS)
• Dual Nx 56/64 (user termination)
• Quad BRI/U (network and user terminations)
In addition, a section is included on using the D
(see Connecting Packet Endpoints in Frame Relay on page 11-28).
The D P submenus (see Figure 11-1) set global ATLAS 550 switch
IAL LAN
parameters as well as individual parameters for each ATLAS 550 port han-
dling a switched call. The individual ports are separated into two port
types: network and user. Network ports terminate a connection from the
Network. User ports terminate incoming calls and, in turn may be con-
nected to user equipment. Network Term on page 11-3 and User Term on page
11-6 provide clarification for these two port types. (See also Figure 11-2 on
page 11-2 for the menu structure.)
In the following sections, I
ATLAS 550 from the Network (PSTN) and O
refers to calls directed toward the Network (PSTN).
ATLAS 550 User Manual
P , including discussions
IAL LAN
P with Frame Relay
IAL LAN

Figure 11-1. Dial Plan Menu

C refers to calls coming to
NCOMING ALLS
UTGOING
C
ALLS
11-1