Direct Inward Dialing; Did Digits Transferred; Did Prefix; Trunk Number - ADTRAN Atlas 550 User Manual

Chapter 11. Dial Plan
D S
IGIT UPPRESSION
D I
IRECT NWARD
D
IALING
DID D
IGITS
T
RANSFERRED
DID P
REFIX
T N
RUNK UMBER
11-16
Write security 3; Read security: 5
When enabled, no digits will be sent toward the network/PBX after going
off-hook on an outgoing call.
Write security: 3; Read security: 5
Defines to the ATLAS 550 whether Direct Inward Dialing (DID) is being
used by the network. If DID is E
must be defined:
Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS 550 from the network if DID is
used. This option only displays if DID is set to E
Write security: 3; Read security: 5
Defines to the ATLAS 550 the prefix digits which are not received as a part
of the DID number. The ATLAS 550 uses the combination of prefix and DID
number to determine the user endpoint that should receive the incoming
call. This option only displays if DID is set to E
then you must define the trunk number.
If Feature Group D is used, DID only refers to DNIS digits.
Write security: 3; Read security: 5
When the network connection does not provide DID digits, the ATLAS 550
must be given a number to use to determine which user endpoint should
receive the incoming call. T
D .
ISABLED
The trunk number must be specific (i.e., no "wild cards").
Example:
To connect an incoming DS0 (trunk) to an endpoint with the A
ber of 963-8615, set the trunk number to 963-8615.
ATLAS 550 User Manual
, then the following information
NABLED
NABLED
NABLED
N displays only when DID is set to
RUNK UMBER
.
. If DID is D ,
ISABLED
num-
CCEPT
61200305L1-1