Figure 10-2. Dedicated Maps - Frame Relay; Using Dedicated Maps With Frame Relay - ADTRAN Atlas 550 User Manual

Chapter 10. Dedicated Maps

USING DEDICATED MAPS WITH FRAME RELAY

A M
CTIVATE AP
A
UTO
M 1 5
APS THROUGH
C M
URRENT AP
10-2
After packet endpoints are created, they must be connected to a physical
port. You can connect the endpoints using either the D
(see also, Chapter 11, Dial Plan). D
D P
IAL LAN
endpoints to a service, and the D
the endpoint.
For packet links created within the P
(see Figure 10-2) to connect packet endpoints to a physical port. Nail
M
APS
the endpoint to a service by selecting D
ical slot (FROM S ) and a port (P
LT
(F C ), and then set the service (TO S
ROM ONFIG
V .
OICE
Write security:3; Read security:5
Activates a dedicated map—automatically or manually. You can have up to
five different dedicated maps, each with an optionally specified name.
Automatically activates a particular dedicated map at the time and day
specified in A
T
CTIVATE IME
Allows you to manually activate a specific dedicated map.
Instructions for Manually Activating a Dedicated Map
Step
Move the arrow keys to highlight the A
1
press E
NTER
Move the arrow key to highlight the map of choice from the pop-
2
up menu list and press E
Read security: 5
Displays the name of the currently active dedicated map (read-only).
ATLAS 550 User Manual
EDICATED
P associates a phone number with
IAL LAN
M
ACKET ANAGER
EDICATED
/PEP) for the data. Assign the DS0s
ORT
LT

Figure 10-2. Dedicated Maps - Frame Relay

(see Activate Time on page 10-6).
Action
.
.
NTER
M or the
EDICATED AP
"nail" the
M
APS
M , use D
ENU EDICATED
M and picking a phys-
APS
/S) to P E or P
KT NDPT KT
M field and
CTIVATE AP
61200305L1-1