Ds0S Available; Wink After Ani/Dnis - ADTRAN Atlas 550 User Manual

DS0 A
S VAILABLE
S M
IGNALING ETHOD
FGD T S
X EQUENCE
FGD R S
X EQUENCE
W ANI/
INK AFTER
DNIS
61200305L1-1
Read security: 5
Indicates which DS0s of the T1 have been defined in this switched endpoint
(indicated by "! "), in another switched endpoint (indicated by "s"), or in a
D M (indicated by "n"). This field is read-only. The following
EDICATED AP
characters may display in this field:
0-9 This DS0 is available. The digit that displays in this field represents
the last digit of the DS0 number.
* This port is requesting this DS0 for this connection, but the DS0 is not
yet activated.
! This DS0 is used by this endpoint.
s This DS0 is used elsewhere in the switched D
S This DS0 is in the switched dial plan and conflicts with this endpoint.
n This DS0 is used in one or more D
N This DS0 is in one or more D
endpoint.
Write security: 3; Read security: 5
Defines to the ATLAS 550 the type of signaling to be used across this trunk.
The signaling selected needs to match the signaling being provided by the
network (PSTN). The following choices are available:
• E&M Immediate
• Loop Start
• Feature Group D
The ATLAS 550 converts signaling types between network and user
terminations.
Write security: 3; Read security: 5
Defines to the ATLAS 550 the format in which to present the outgoing dig-
its. Choices: N if no digits are to be sent; ANI/DNIS to send both ANI
ORMAL
and DNIS; DNIS to send DNIS only; ANI to send ANI only.
Write security: 3; Read security: 5
Defines to the ATLAS 550 the format in which to receive the incoming dig-
its. Choices: N if no digits are to be received; ANI/DNIS to receive
ORMAL
both ANI and DNIS; DNIS to receive DNIS only; ANI to receive ANI only.
Write security: 3; Read security: 5
When enabled, the ATLAS 550 will transmit a wink after ANI/DNIS digits
are transmitted.
ATLAS 550 User Manual
M
EDICATED
M
EDICATED APS
• E&M Wink
• Ground Start
Chapter 11. Dial Plan
P .
IAL LAN
.
APS
, and conflicts with this
11-15