Prot; Status - ADTRAN Atlas 550 User Manual

P E
ACKET NDPNTS
S
TATUS
E N
NDPNT AME
P
ROT
S R
IG OLE
S T
IG YPE
61200305L1-1
The P menu defines, monitors, and tests a packet endpoint.
E
ACKET NDPNTS
Submenus include S
TATUS
and E S .
NDPNTS ORT
S submenus display the status of each packet endpoint including the
TATUS
packet endpoint name (E
ing role (S ), the signaling type (S
R
IG OLE
S ), and the connections (C
TATE
cuss each of these fields.
Read Security: 5
Displays the packet endpoint name as defined in the P
C M (also see Config on page 8-6).
ONFIG ENU
Read Security: 5
Displays the layer 2 protocol that this packet endpoint terminates. FR indi-
cates that this packet endpoint is configured for frame relay. TBOP indi-
cates that this packet endpoint is configured for Transparent Bit Oriented
Protocol (TBOP).
Read Security: 5
Displays the frame relay signaling role for this packet endpoint. The
selections include O , U
FF
O
FF
Indicates that the endpoint is configured so that it does not use signaling.
U
NKNOWN
Indicates that the endpoint is configured to auto-detect the role, but has not
yet done so.
N
ETWORK
Indicates that the endpoint is acting as the network end of a UNI link.
U
SER
Indicates that the endpoint is acting as one end of a UNI link.
B
OTH
Indicates that the endpoint is acting as one end of an NNI link.
Read Security: 5
Displays the frame relay signaling type used on this packet endpoint. Selec-
tions include U , A
NKNOWN
U
NKNOWN
Indicates that the endpoint is configured to auto-detect the signaling stan-
dard to use, but has not yet done so.
ATLAS 550 User Manual
, P , C
ERFORMANCE ONFIG
N ), the protocol type (P
NDPNT AME
), the signaling state (S
T
IG YPE
P ). The following sections dis-
URRENT ORT
, N , U
NKNOWN ETWORK SER
A, A D, and LMI.
NNEX NNEX
Chapter 8. Packet Manager
, T , E C ,
EST NDPNT OUNT
), the signal-
ROT
IG
E /
ACKET NDPNTS
, and B .
OTH
8-3