Sublink; Protocol - ADTRAN Atlas 550 User Manual

P C
ACKET NCTS
F : PEP
ROM
S
UBLINK
T : PEP
O
S
UBLINK
P
ROTOCOL
61200305L1-1
After packet endpoints are defined, they are connected in the packet con-
nects (P C ) map. P
ACKET NCTS
from packet endpoint to packet endpoint. You can think of it as a dedicated
map for virtual ports rather than physical ports.
Write Security: 3; Read Security: 5
Selects one packet endpoint for the packet connection. Packet endpoints
created in the packet endpoint configuration are visible on a pull-down
menu which includes the R
available in this pull-down menu. The router is the internal the ATLAS 550
router and can be used multiple times within the P
Write Security: 3; Read Security: 5
If the packet endpoint selected in F
available in this menu. In frame relay, this is the PVC from which you are
selecting to groom data.
Write Security: 3; Read Security: 5
Selects the other packet endpoint for the packet connection. Refer to F
PEP for more detail.
Write Security: 3; Read Security: 5
If the T : PEP packet endpoint supports sublinks, the available sublinks are
O
shown within this menu, which includes the R
Write Security: 3; Read Security: 5
Selects the protocols for this packet connection. Selecting the protocols on
each individual connection allows the mixing of data from multiple sources
onto a single PVC. Available protocols include the following: A
, SNA - LLC2, SNAP, and T
P
ACKET VOICE
and TASYNC).
Keep in mind the following:
1. If A
LL
PVC are not allowed.
2. If R
OUTER
automatically set as the P
3. If a TBOP packet endpoint is selected as one packet
endpoint, T
P
ROTOCOL
ATLAS 550 User Manual
C connects upper layer protocols
ACKET NCTS
option. Additionally, a router option is
OUTER
: PEP supports sublinks, they are
ROM
OUTER
RANSPARENT PROTOCOLS
is selected, additional connections from that
is selected as one packet endpoint, IP is
ROTOCOL
is automatically set as the
RANSPARENT
.
Chapter 8. Packet Manager
C menu.
ACKET NCTS
ROM
option.
, IP,
LL
(TBOP
.
8-13
: