Figure C-25. Menu For Creating Packet Endpoints; Figure C-26. Menu For Configuring Sublinks; Figure C-27. Menu For Connecting The Tbop Endpoints - ADTRAN Atlas 550 User Manual

Step 1
Step 2
Step 3
Step 4
61200305L1-1
From P M
ACKET ANAGER
points: create a frame relay endpoint for the private frame relay link, and
create a TBOP link to carry the signaling between the PBXs (see Figure C-25).

Figure C-25. Menu for Creating Packet Endpoints

From P
M
ACKET ANAGER
the sublinks.
All 23 voice channels can be carried by one DLCI transported on five DS0
channels. One DS0 and one DLCI are required for the TBOP channel carry-
ing the signaling between the PBXs. To ensure that both the voice and the
TBOP DLCIs are allocated their necessary frame relay bandwidth, set the
Quality-Of-Service (QOS) parameter with 64K allocated to the TBOP chan-
nel and 320K (5*64) allocated to the voice channels (see Figure C-26).
Connect the TBOP packet endpoints. Connect the TBOP data path between
the DS0 containing the signaling information and the private frame relay re-
source (see Figure C-27).

Figure C-27. Menu for Connecting the TBOP Endpoints

Connect packet endpoints to the physical links. Each DS0 carrying voice from
the PBX must be connected to the frame relay endpoint (see Figure C-28).
ATLAS 550 User Manual
Appendix C. Frame Relay Examples
/P E /C
ACKET NDPNTS ONFIG
/P E /C
ACKET NDPOINTS ONFIG

Figure C-26. Menu for Configuring Sublinks

, create the packet end-
, configure
/S
UBLINKS
C-9