Figure 10-7. Data Connections - ADTRAN Atlas 550 User Manual

Chapter 10. Dedicated Maps
10-10
Instructions for Defining the Data Connections
Step
Name your map by navigating to D
1
M and entering a name.
APS
Navigate to the C
2 This field defines the connections necessary to route the required
bandwidth.
3 For T1-A Data, select and define FROM S
4 Select and define the "from" P
5 Select and define TO S
Select and define P
6
Slot 2.
7 Select and define F
8 Set the V.35 to operate at 64k per DS0 in T
Repeat these steps for the remaining data connections (i.e., T1-B
9
and T1-C) as follows:
Copy the current connection by positioning the cursor on the index
9a
# and pressing
C
Insert new connection lines by positioning the cursor over the
9b
index # of the current connection and pressing I on the keyboard.
Paste this information onto a new connection line by positioning
9c the cursor over the index number of the new connection, and
pressing .
P
Modify these connection lines to complete the connections for data
10
(see Figure 10-7).
ATLAS 550 User Manual
(DS0s 9-24)
Action
EDICATED
/E M field, C
REATE DIT APS
as 1)T1/PRI.
ORT
/S as S2) V35N
LT
/PEP as 1) N 56/64; 1) represents Port 1 of
RT X
C DS0s as 9-24.
ROM ONFIG
.

Figure 10-7. Data Connections

M / C /E
APS REATE DIT
.
ONNECTS
as N1) T1/PRI-1.
LOT
; S2) represents Slot 2.
X
C , [R =64
O ONFIG ATE K
61200305L1-1
].