Solaris - HP Open View Installation And Maintenance Manual

Configuring Hosts and Storage Arrays
Figure 12: Fast!UTIL Options menu
Figure 13: Configuration settings modified menu
Figure 14: ExitFast!UTIL menu

Solaris

To set the execution throttle for a QLogic HBA driver on a Solaris host:
1. From the host, enter cd /kernel/drv.
2. To open the ql2x00.conf file, enter:
3. Locate the hba0_execution_throttle = parameter.
4. Set the parameter to the desired execution throttle value.
5. Save and close the ql2x00.conf file.
6. Reboot the host.
60
vi ql2x00.conf
Continuous Access Storage Appliance Installation and Maintenance Guide