Table of Contents
Advertisement
Implementing Path Failover
Installing Secure Path Manager
Ensure the host meets the following requirements before installing Secure Path Manager:
To install Secure Path Manager on a host:
1. Copy the following executable to the host on which you want to install Secure Path
2. From the host, use WinZip to extract the contents of the SPM_V40_xx.exe file to a
3. Open the c:\sp\SPM_V40_xx directory and run AutoMenu.exe.
4. Click Install Applications.
5. Click Install SecurePath Manager.
6. Click Next.
7. Click Yes for the license agreement.
8. Click Next when prompted for the directory location.
9. At the Install Notification Utility? prompt, click No.
10. At the confirmation prompt, click No.
11. Click Next.
12. Click Finish.
13. Click Exit twice.
72
Internet Explorer
IP connectivity to the appliance node
JAVA version 1.3.1 only
Supported Secure Path Manager version (confirm with CASA support team)
Manager:
SPM_V40_xx.exe
This executable is also located on the appliance nodes in the following directory:
c:\sanlink support software\compaq storage\SecurePath\v4.0xx
temporary directory, such as c:\sp.
Continuous Access Storage Appliance Installation and Maintenance Guide
Advertisement
Table of Contents
