Table of Contents
Advertisement
Completing the Appliance Setup
Disabling Automatic Server Recovery
HP Manufacturing installs the ProLiant management agents on the appliance nodes before
shipping the appliance. However, installing these agents may result in unexplained,
intermittent reboots. To prevent these reboots, HP Manufacturing also disables the Automatic
Server Recovery (ASR) parameter prior to shipment.
To disable Automatic Server Recovery:
1. While the node is booting up, press F9.
2. Use the arrow keys to highlight Automatic Server Recovery and press Enter to select it.
3. Highlight ASR Status and press Enter.
4. Select Disable and press Enter.
5. Highlight Thermal Shutdown and press Enter.
6. Select Disable and press Enter.
7. Press Esc and then press F10.
32
The BIOS options window opens.
The Automatic Server Recovery options are displayed.
Continuous Access Storage Appliance Installation and Maintenance Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Open View and is the answer not in the manual?
Questions and answers