Creating Lun 0 Using Commandview - HP Open View Installation And Maintenance Manual

Replacing and Configuring Appliance Components

Creating LUN 0 using CommandView

To create LUN 0 using CommandView:
Note:
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Press Alt+C to open a command prompt window.
3. Enter the following command to start the CommandView services and to discover the
4. Enter the following command to open the CommandView user interface:
5. Click the LUN Management tab.
6. Click Create LUN.
7. Enter the LUN number, which is zero (0).
8. Click 1 in the Redundancy Group box.
9. In the LUN Size box, enter the amount of storage space that displays for Redundancy
10. Click OK.
11. Close the CommandView window.
12. Press Alt+C to open a command prompt window.
13. To reinstate security on the appliance node, enter the following command:
14. Reboot the appliance node to detect the new LUN.
104
Complete this procedure on the peer node used in
disks:
c:\rpic\utilities\StartCommandView
c:\sanmgr\commandview\client\sbin\launcher.cmd
The CommandView window opens.
Group 1, which you created in
c:\rpic\utilites\SetPortSecurity E10001
step 8.
Continuous Access Storage Appliance Installation and Maintenance Guide
"Detecting the array."