Installing Powerpath; Downloading The 3.0.5 Patch - HP Open View Installation And Maintenance Manual

Implementing Path Failover

Installing PowerPath

This section describes how to install PowerPath version 3.0.5 on the appliance nodes. Use this
software if there are EMC storage arrays connected to the appliance.
This section describes the following topics:
Note:
both PowerPath and Secure Path on the appliance nodes is not supported.
Prerequisites:
Note:
CD for Windows to install PowerPath 3.0.0 first. Then you can upgrade to version 3.0.5 using the
patch that you download from the EMC web site (See

Downloading the 3.0.5 patch

Instruct the customer to log on to EMC's web site, using the appropriate account information,
and download the 3.0.5 patch.
The name of the patch is EMCPP.NT4.3.0.5.Patchb086.zip. Extract the contents of
the zip file to the c:\EMCPP.NT4.3.0.5.Patchb086 folder.
76
Downloading the 3.0.5 patch
Installing version 3.0.0
Installing version 3.0.5
If Secure Path is already installed on the appliance nodes, do not install PowerPath. Installing
Current SANOS version is 5.6.1.17.
The EMC PowerPath version 3.0.5 CD for Windows, which includes PowerPath version
3.0.0 for Windows NT4. (The customer should have received this CD when the EMC
storage array was purchased.)
A Power Path 3.0.5 installation CD for Windows NT is not available. You must use the 3.0.5
"Downloading the 3.0.5
Continuous Access Storage Appliance Installation and Maintenance Guide
patch.")