Mod Updatedb; Syntax; Example - HP Open View Installation And Maintenance Manual

Miscellaneous Commands

mod updatedb

Syntax

mod updatedb -old old_hostname -new new_hostname

Example

This command applies to version 5.0.4 or earlier of the appliance. If the IP address of one of
the nodes changes and you are running version 5.0.4 or earlier, you must run this command to
update the database with the new node information.
Command
mod updatedb -old 14.1.195.23 -new 13.1.194.24
Purpose
Updates the database with the new IP address specified for the node.
Output
Database updated successfully.
176 Continuous Access Storage Appliance Installation and Maintenance Guide