Configuring Hba Drivers; Qlogic Hbas; Hp Fiber Card Hbas - HP Open View Installation And Maintenance Manual

Configuring Hosts and Storage Arrays

Configuring HBA drivers

This section describes the HBA drivers you can configure and the operating systems that
support them.
To determine which version of the HBA driver the appliance supports:
1. Access the following internal HP web site:
2. Locate the Storage Virtualization section.
3. Select the appropriate support matrix for the appliance.

QLogic HBAs

The following operating systems support QLogic HBAs:
After you determine which HBA driver to install, go to the QLogic web site (www.qlogic.com)
to obtain the appropriate driver and instructions for the desired operating system.

HP fiber card HBAs

The following versions of the HP-UX operating system support the HP fiber card HBAs
indicated:
After you determine which HBA driver to install, go to the HP web site (www.hp.com) to
obtain the appropriate driver and instructions for the desired operating system.
56
http://turbo.rose.hp.com/spock/
Netware 5.1, 6.0, and 6.0 Cluster v1.6
RedHat Linux 7.1 (Kernel 2.4.2)
RedHat 8.0 (Kernel 2.4.18)
RedHat AS 2.1 (Kernel 2.4.9-e.3)
United Linux 1.0 (Kernel 2.4.19-64GB-SMP 32 bit)
Suse Linux 8.0 (Kernel 2.4.19-64GB-SMP 32 bit)
Solaris 2.6, 2.7, 2.8, 2.9, and Veritas Cluster Server v3.5
Veritas Cluster Server v2.0
Windows 2000
Windows 2000 Advanced Server Cluster
Windows NT 4.0
Windows NT 4.0 Cluster Server
Windows Server 2003 32 bit (not clustered)
Windows Server 2003 64 bit (not clustered)
HP-UX 10.20 (HP A6684A, HP A6685A)
HP-UX 11.00 (HP A5158A, HP A6684A, HP A6685A)
HP-UX 11.11 (HP A5158A, HP A6684A, HP A6685A, HP A6795A)
Continuous Access Storage Appliance Installation and Maintenance Guide