Configuring Secure Path Manager - HP Open View Installation And Maintenance Manual

Configuring Secure Path Manager

To configure Secure Path Manager on the host:
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Click switchui.
3. Click Yes to continue.
4. Click Start > Programs > Securepath >SecurePathCfg.
5. Click Clients.
6. If casapeernode is listed in the Clients box, select the name and click Delete Client.
7. Enter the appliance node name (for example, CasaN_0) in the Selected Client box.
8. Click Add Client.
9. Enter the other appliance node name (for example, CasaN_1) in the Selected Client box.
10. Click Add Client.
11. Click OK.
12. Click Password.
13. Enter the password twice. Use the password entered in
14. Click OK.
15. Click Done.
16. Repeat
Continuous Access Storage Appliance Installation and Maintenance Guide
The CASA UI Switch Utility dialog box opens.
The Windows NT desktop opens.
The Secure Path Configuration Utility window opens
The Client Access Configuration window opens
The names of both appliance nodes and the host display under Clients.
Path Agent" on page 71.
step 1 through step 15
(Figure
on the other appliance node.
Implementing Path Failover
(Figure 15).
16).
step 13 of "Installing the Secure
73