Software Ports - HP Open View Installation And Maintenance Manual

Completing the Appliance Setup
Figure 6: Network interface ports on the node

Software ports

The appliance has several software ports. The customer's network administrator must modify
the local name–to–port–number tables to include the port names and numbers listed in
The network administrator must have these names to open the ports in the firewall and allow
IP mirror traffic to flow through the network. The network administrator should refer to the
firewall documentation to determine how to open these ports for external access. To allow
external access to the appliance user interface, the network administrator should open TCP
port 80 in the firewall.
Table 2
Table 2: Software port information
Port name
CASA_FAILOVER_PORT
CASA_HLTH_PORT
CASA_MANAGE_1
CASA_MANAGE_2
CASA_MANAGE_PORT
CASA_MIRROR_PORT
CASA_PROXY_MIRROR_PORT
34
lists the software port information.
Port number/protocol
4051/TCP
2001/UDP
10340/TCP
10350/TCP
4050/TCP
4099/TCP
4098/TCP
Continuous Access Storage Appliance Installation and Maintenance Guide
Description
Enables peer nodes to share failover
information
Monitors the heartbeat between local and
remote nodes
Carries management traffic between local and
remote nodes
Carries management traffic between local and
remote nodes
(For peer nodes on the local appliance)
Sends information from the management
software to SANOS, which is the appliance
software
Carries IP mirror traffic between local and
remote nodes
Carries IP mirror traffic between peer nodes
Table 2.