Mod Cache; Syntax; Example - HP Open View Installation And Maintenance Manual

mod cache

Syntax

mod cache -name NAME1,...,NAMEN -refresh
where NAME is expansion, partition, ptimage, fcpmirror,
ipmirror, host, node, lun, lunmap, all

Example

Command
mod cache -name all -refresh
Purpose
Updates the specified data in SMS (the service for the user interface) by gathering the latest
data from DPF (the core component of the SANOS software).
Output
Refreshed the cache with getExpansions
SMS Cache has been updated
Refreshed the cache with getParts
SMS Cache has been updated
Refreshed the cache with getPTImages
SMS Cache has been updated
Refreshed the cache with getLocalMirrors
SMS Cache has been updated
Refreshed the cache with getRemoteMirrors
SMS Cache has been updated
Refreshed the cache with getHosts
SMS Cache has been updated
Refreshed the cache with getNodes
SMS Cache has been updated
Refreshed the cache with getLunIds
SMS Cache has been updated
Refreshed the cache with getMaps
SMS Cache has been updated
Continuous Access Storage Appliance Installation and Maintenance Guide
Miscellaneous Commands
171