Installing The Secure Path Agent - HP Open View Installation And Maintenance Manual

Installing the Secure Path Agent

The Secure Path Agent is installed on the appliance nodes when the appliance software is
installed.
To configure Secure Path Agent on the appliance node:
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Click switchui.
3. Click Yes to continue.
4. Click Start > Programs > Securepath >SecurePathCfg.
5. Click Clients.
6. If the name casapeernode is listed, select the name and click Delete Client.
7. Enter the appliance node name (for example, CasaN_0) in the Selected Client box.
8. Click Add Client.
9. Enter the name of the host on which Secure Path Manager is (or will be) installed in the
10. Click Add Client.
11. Click OK.
12. Click Password.
13. Enter the password twice. The password length must be between eight and sixteen
14. Click OK.
15. Click Done.
16. Repeat
Continuous Access Storage Appliance Installation and Maintenance Guide
The CASA UI Switch Utility dialog box opens.
The Windows NT desktop opens.
The Secure Path Configuration window opens.
The Clients dialog box opens.
Selected Client box.
The names of the appliance node and the host display under Clients.
characters.
step 1 through step 15 on the other appliance node.
Implementing Path Failover
71