HP Open View Installation And Maintenance Manual page 109

7. Follow steps 1 through 21 in
8. Set the console display to the peer node. Ensure the hp OV CASA Console window on
9. Press Alt+C to open a command prompt window and enter:
10. To access the registry editor, enter:
11. Click HKEY_LOCAL_MACHINE > SYSTEM > DISK.
12. From the menu bar, click Registry > Export Registry File.
13. Under Export range, ensure that Selected branch is selected and the box is populated
14. Save the exported file in the c:\ directory as follows
15. Click Save.
16. Close the Registry Editor window.
17. From the console window, click backup\restore > restore.
18. Enter p at the Restore type prompt.
19. Press Enter at the Restore from location < c: default > prompt.
20. Enter the number of the most recent restore at the
21. Enter y at the Continue? (y/n/q) prompt.
22. To authenticate the SANOS administrator account, specify the following:
23. Press any key when the following messages are displayed:
24. Set the console display to the node with the new hard disk drive.
Continuous Access Storage Appliance Installation and Maintenance Guide
page 128 to reinstall the appliance software.
the peer node is open in administrative mode.
cd \
regedit
The Registry Editor window opens
The Export Registry File window opens
with the following text:
HKEY_LOCAL_MACHINE\SYSTEM\DISK
File name—tempPeerReg
Save as type—Registration File
The Restore window opens.
A list of all backups stored in the selected location is displayed.
Restore number <or q to quit> prompt.
Login name
Password
This copies the SANOS configuration information to the node with the new hard disk
drive.
Restore to peer node successfully completed.
Done
Replacing and Configuring Appliance Components
"Reinstalling the appliance
(Figure 26).
(Figure 27).
software" on page 124 through
(Figure 27):
109