Sun Solaris - HP Surestore Tape Library Model 10/180 Configuration Manual

Sun Solaris

For Sun Solaris operating systems, perform the following operating
system configurations:
Install the appropriate host bus adapter(s)
•
Install the corresponding drivers for the interface card(s)
•
Install the backup software
•
To verify the installation, look for the library and drive after powering
up the host.
1. Close all open applications and exit the Common Desktop
Environment (CDE).
2. Type "init 0" at any prompt. This will shut down all processes,
and take you to the OpenBoot PROM.
3. Type "reset".
4. At the OK prompt, type "probe-scsi-all".
Run a test backup to ensure that all components are properly
configured.
Configuring the Host System 5