Reconfiguring The Console Switch User Interface - HP Open View Installation And Maintenance Manual

Reconfiguring the console switch user interface

You use the HP console switch to move between appliance nodes and to run configuration
procedures. When you replace the console switch, you must reconfigure the user interface for
the console switch.
To reconfigure user interface, which is called the HP ID window:
1. Press Ctrl twice to access the console switch user interface.
2. Press Ctrl four times to access the Administrator Command menu.
3. Use the arrow keys to select Add Port and press Enter.
4. Select ID Setup and press Enter.
5. Press the arrow keys to position the HP ID window. (For example, you may want the HP
6. Press Enter to save the selected position.
7. To change the background color, press Page Up and select a color.
8. To change the text color, press Page Down and select a color.
9. To change the length of the window, press + or – accordingly.
10. To change the size of the window, press the space bar to toggle between large and small.
11. Press Esc to open the Add Port window.
12. Enter the name and address of the appliance node. (The address is the port number on the
13. Do not change the default values for ID Dwell Time and Scan Dwell Time.
14. Select Save Changes and press Enter.
15. To exit the ID window, press Esc.
Continuous Access Storage Appliance Installation and Maintenance Guide
ID window to open in the lower left corner of the monitor). To move faster, press and hold
Shift as you press the arrow keys.
back of the node.)
Replacing and Configuring Appliance Components
121