Node Ports - HP HPE 3PAR StoreServ 8000 Installation Manual

Node Ports

Figure 4 Node ports location
Table 3 Node ports description
Callout Slot
Label Number
1 Slot 2
2 Slot 0
3
4 Slot 3
5 Slot 1
6
7
Port Type Description
PCI-HBA PCIe slot for optional host bus adapters (HBAs):
4-port 16 Gb FC Adapter
2-port 10 Gb iSCSI/FCoE Converged Network Adapter (CNA)
4-port 1 Gb NIC Adapter
2-port 10 Gb Ethernet Adapter
Fibre Two onboard 16 Gb FC ports used for connecting to host systems:
Channel
FC-1
FC-2
Ethernet MGMT-1: Gb Ethernet port used to connect to the storage array management
interfaces.
Ethernet RC-1: Onboard Gb Ethernet port used for remote copy or file persona.
SAS Two onboard 12 Gb SAS ports used with SAS cables for connecting to the
drive enclosures and I/O modules:
DP-1
DP-2
Cluster Two Cluster Interconnect Link ports used with 4-directional interconnect link
Interconnect cables that connect the controller nodes
Link
NOTE: Cluster Interconnect Link ports only used with 4-node systems
MFG Serial/Console port only for Hewlett Packard Enterprise internal use.
(serial/console
port)
Controller Nodes 17