Ip Camera Connection - Raymarine a series Installation Instructions Manual

1
2
1. MFD
2. Video accessory cable
3. VGA cable to external display
4. External display (e.g. HDTV)
Video specification
Signal type
Format
Connector type
Output resolution
e9 and e12 Video cables
The following video cable is required for the video in
/ out connector on the e95 / e97 / e125 / e127 variant
multifunction displays.
Part number Description
R70003 5 m (16.4 ft.) Video
cable for e9 and
e12 (1 x video in
and 1 x video out
VGA)
Cables and connections
4
D12329-2
Composite
PAL or NTSC
BNC (female)
720p
Notes

4.21 IP Camera connection

Raymarine ® IP cameras can be connected
directly to the display's network connection or can
be connected to the SeaTalk
Raymarine ® network switch.
The network connection transmits the video signal to
a compatible Raymarine
IP camera direct connection
1. MFD
2. CAM200IP
3. RayNet to RJ45 SeaTalk
4. Ethernet coupler (R32142)
IP camera network connection
1. MFD
2. Raymarine ® network switch
3. RayNet to RJ45 SeaTalk
4. Ethernet coupler (R32142)
5. CAM200IP
hs network, via a
® MFD.
1
hs adaptor cable
1
hs adaptor cable
D12592-5
D12593-5
53