Dealer Calibration; Switching The Depth And Speed Position - Raymarine i40 Installation And Operation Instructions Manual

7.6 Dealer calibration

Dealer calibration enables you to set:
• User calibration menu access On (default) and Off.
• Boat show mode On and Off (default) (Boat show
mode is only be available on displays set as
repeaters).
• Reset to factory defaults.
Changing dealer calibration settings
1. Simultaneously press and hold the Down and
Action buttons for 12 seconds to display the
Dealer Calibration page.
60 5
55
10
50
12
45 15
20
40
35
25
30
+
2. Press the Action button to display the User
Calibration Access page.
3. Use the Up and Down buttons to switch access
to the User Calibration menu On (default) and Off.
Selecting Off disables access to the User
Calibration menu.
4. Press the Action button to display the Boat Show
Mode page.
5. Use the Up and Down buttons to switch boat
show mode On and Off.
Selecting On will put the display into boat show
mode.
Note: Boat Show Mode NOT be used whilst your
vessel is in use.
6. Press the Action button to display the Factory
defaults page.
7. To reset the display to factory default settings:
i. Use the Up or Down buttons to change the
reset option to Yes.
ii. Press the Action button to reset your display
to factory default settings.
Resetting the unit defaults the display to a
repeater display. Refer to
details on how to change the display back to a
data master, if required.
8. To save your settings and return to normal
operation from any page, simultaneously press
and hold the Down and Action buttons for 2
seconds.
42
D12399-1
CAL
CAL
D12413-1
CAL CAL
D12397-1
CAL CAL
D12406-1
6.3 Data master for
7.7 Switching the depth and speed
position
1. Press the Action button to switch speed and
depth positions on the display.
D12510-1
i40