Printer Remote Control Selection - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
3-7-6

Printer Remote Control Selection

To assign a Printer to the remote keys P1, P2 and/or P3:
1.) Press the UTILITIES key on the keyboard.
2.) In the "Utilities" menu on the left side of the screen select SYSTEM to invoke the setup desktop.
3.) Select the
Configure Buttons
Select Printer
Report Printer
• Configure "Remote" Buttons: Select the desired remote control button.
• Select Printer: Select the desired Printer for the selected remote control button.
-
• Report Printer (all Buttons): Select the desired Report Printer from the drop-down menu.
The selected Report Printer is usually used for printing reports and images from Sonoview.
NOTICE
!! NOTICE:
10
EVISION
page. (If not currently shown, select the [Print] tab).
P1-P2-P3
Figure 3-121 P1-P2-P3 page - Print tab
If it is desired, check mark "For Reports use Report Printer."
Chapter 3 - Setup Instructions
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
3-97