GE Voluson i BT06 Service Manual page 100

GE
D KTI106052, R
IRECTION
Attaching the Voluson i / Voluson e to the Dock Cart (cont'd)
3-5-2-1
6.) Plug the power cable and the USB-cable into the DVD-drive; the other end of the USB cable plug
to an USB port on the Voluson i / Voluson e.
7.) Mount and connect other peripherals as described in
8.) Connect the main power cable to the Power Supply of the Dock Cart; the other end connect to a
hospital-grade main power outlet with the proper rated voltage.
Figure 3-29 Peripherals mounted and secured / Power Supply of Dock Cart / USB-port on Dock Cart
9.) Press the Circuit breaker on the Dock Cart. To start up the system, press the On/Off button
(see:
3-30
10
EVISION
Tray recorder for
DVD+/R/RW Drive
USB port
Upper storage shelf
(e.g., B&W printer)
Lower storage shelf
(e.g., Color printer)
Power Supply
Figure 3-87) on the control panel of the Voluson i / Voluson e system (for ~3 seconds).
Section 3-5 - Connection of Auxiliary Devices
V
OLUSON
Section 3-5-2-5 and Section
Circuit breaker on Dock Cart
main power cable
i / V e
OLUSON
S M
ERVICE ANUAL
3-5-2-6.