Printer Remote Control Selection; Peripherals Page - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
3-7-5

Printer Remote Control Selection

To assign the Remote PRINT A key, Remote PRINT B key and Report Printer to desired Printer:
1.) On the control panel, press the UTILITIES key.
2.) In the "Utilities" menu on the left side of the screen select SYSTEM to invoke the setup desktop.
3.) Select the
Print A
• Remote Print A: Select the desired Printer for the remote control PRINT A key.
• Remote Print B: Select the desired Printer for the remote control PRINT B key.
NOTE: Optionally the Remote Control can be done by Foot switches.
Therefore select "Print A" or "Print B" in "Foot Switch Left" or "Foot Switch Right" - section.
• Report Printer: Select the desired Report Printer from the drop-down menu.
The selected Report Printer is usually used for printing reports and images from Sonoview.
NOTICE
3-38
RETZTECHNIK
2
EVISION
page.
PERIPHERALS
Figure 3-48 Peripherals page
Section 3-7 - Printer Installation
RAFT V
OLUSON
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE
Foot Switch
Remote
Control
Report Printer
Print B
ANUAL