Remote Control Selection - GE Voluson P8 Basic Service Manual

GE DRAFT
DIRECTION 5775469, R
3-7-8

Remote Control Selection

To assign an auxiliary device (e.g., printer) to the remote keys P1, P2, and/or P3
1.) Press the UTILITIES key on the control console.
2.) In the "Utilities" menu select SETUP button to invoke the setup desktop on the screen.
3.) On the right side of the screen select CONNECTIVITY and then click the
tab.
1
2
1c
1d
Figure 3-54 System Setup - Connectivity - BUTTON CONFIGURATION page (Overview)
• Overview tab:
NOTE: Optionally the Printer Remote Control can be done by the Foot switch.
(refer to:
• Detailed Setup tab:
-
3 DRAFT (J
EVISION
1 Overview
1a Configure buttons
1b Selected Printer
1c Recorder Control
1d Select P1 to send Email
A.) Configure "Remote" Buttons: Select the desired remote control button.
B.) Select Printer: Check mark and select the desired Printer for the remote control button.
C.) Recorder Control: Check mark this item to use the selected P? key for Recorder Control.
D.) Check mark "Use P? key to send Email", and adjust Settings.
Figure 3-49: System Setup - Connectivity - PERIPHERALS page on page
If it is desired, check mark "Use Report Printer for Reports"
Chapter 3 - Setup Instructions
19, 2018)
ULY
2 Detailed Setup
V ™ P8/V
OLUSON OLUSON
B S M
ASIC ERVICE ANUAL
BUTTON CONFIGURATION
1a
1b
3-48)
™P6
3-53