Connection And Usage Of The Optional Modo Cart; Attaching The Voluson I / Voluson E To The Modo Cart - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
3-5-1

Connection and Usage of the optional Modo Cart

DO NOT CONNECT any devices to any AC power other than the on-board outlets from
WARNING WARNING
the transformer, as this might increase leakage currents and sacrifice patient safety.
!! WARNING:
WARNING WARNING Before starting the Voluson i / Voluson e or Peripherals that are connected to the Modo
Cart, ALWAYS make sure that rating of the isolation transformer fuses is compatible
!! WARNING:
and the voltage output selector is in the correct position.
The wrong fuses and position of the voltage output selector may cause major damage
on the Voluson i / Voluson e system and connected peripherals.
Make sure that all peripherals are firmly secured in position using Velcro tapes or straps.
CAUTION
Place heavy and large devices on the middle storage shelf.
!! CAUTION:
3-5-1-1

Attaching the Voluson i / Voluson e to the Modo Cart

A battery or an empty battery shell should always be attached to the Voluson i / Voluson e system
NOTICE
before attaching it to the Modo Cart.
!! NOTICE:
1.) Hold the Voluson i / Voluson e slightly tilted towards you and place it over the front sliding guides.
DVD Drive
(upper storage shelf)
It is not possible to fix the Voluson i / Voluson e on the mounting plate of the Modo Cart!
CAUTION
!! CAUTION:
2.) Take a power extender cable and plug it into the AC main adapter of the Voluson i / Voluson e.
10
EVISION
Figure 3-18 Voluson i / Voluson e attached to the Modo Cart
Figure 3-19 AC (main) Adapter connection
Chapter 3 - Setup Instructions
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
front sliding guides
3-25