Remote Control Selection - GE Voluson 730Expert Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D 105899, R
IRECTION EVISION
3-7-5

Remote Control Selection

To assign an auxiliary device (e.g., printer) to the remote keys PRINT A and/or PRINT B, or to adjust
Foot switch, etc.:
1.) On the Touch Panel, touch UTILITIES.
2.) In the Utilities menu, touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) Select the
VCR Source
Print A
• Remote Print A: Select the desired Printer for the remote control PRINT A key.
• Remote Print B: Select the desired Printer for the remote control PRINT B key.
NOTE: Optionally the Remote Control can be done by Foot switches.
Therefore select "Print A" or "Print B" in "Foot Switch Left" or "Foot Switch Right" - section.
• Report Printer: Select the desired Report Printer from the drop-down menu.
The selected Report Printer is usually used for printing reports and images from Sonoview.
NOTICE
!! NOTICE:
• Foot Switch Left/Right: Select desired function of the Foot switch Left and Right.
After adjustment, click SAVE&EXIT to save Settings and exit System Setup.
3-40
3 DRAFT (A
page.
PERIPHERALS
Figure 3-47 Peripherals page
Section 3-7 - Printer Installation
29, 2008)
PRIL
V ® 730E
OLUSON XPERT
S M
ERVICE
Foot Switch
Remote
Control
Report Printer
Print B
(BT03)
ANUAL