Tray Lower - Removal Procedure; Tray Lower - Installation Procedure - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
8-19-3 Replacement of the Tray lower
8-19-3-1 Manpower
One person, 10 minutes
8-19-3-2 Tools
Phillips screwdriver 1
Allen wrench 5
8-19-3-3 Preparation
1.) Put away all things on the Tray (e.g. Printer).
8-19-3-4

Tray lower - Removal Procedure

1.) Loosen the 4 Allen screws that fasten the Tray lower and carefully remove it.
2.) On the back side of the Tray screw off the 6 screws and you have the Tray only.
8-19-3-5

Tray lower - Installation Procedure

1.) Place the new Tray and fasten with the 4 Allen screws (as shown in
in Figure 8-63 on page
10
EVISION
Figure 8-63 screw off the 4 screws
Figure 8-64 screw off the 6 screws
8-47).
Chapter 8 - Replacement Procedures
V i / V
OLUSON OLUSON
S M
ERVICE
Figure 8-64 on page 8-47
e
ANUAL
and
8-47