GE Voluson i BT06 Service Manual page 124

GE
D KTI106052, R
IRECTION
Connection via Bluetooth Adapter (cont'd)
3-5-12-1
NOTE: DO NOT connect the Bluetooth adapter via USB hub, to the Modo Cart or to the Dock Cart
or to the Voluson Station.
This is not an approved configuration.
In most cases, it will not work and will cause software complications.
The printer being used may not be a medical device. The Bluetooth Printer Set and the Power
CAUTION
Supply of the Bluetooth Printer Adapter is also not a medical device.
!! CAUTION:
The equipment meets the requirements of the EN 60950 Standard.
Please observe that the complete Bluetooth Printer Assembly has to be located outside of the
CAUTION
patient environment (according to IEC 60601-1 / UL 60601-1).
!! CAUTION:
Please use the proper Bluetooth Printer Connection set. See:
NOTICE
You also can connect the Printer directly with an USB-cable. If so, please ensure to use the AC mains
!! NOTICE:
power outlet provided by the Voluson Station / Voluson Dock Cart (auxiliary output) to ensure medical
grade separation from AC mains.
If you have a Voluson i/e only and you use the USB-cable you need to connect the AC mains of the
printer to a medical grade Isolation Transformer.
3-54
10
EVISION
Section 3-5 - Connection of Auxiliary Devices
V
OLUSON
S
Chapter 9 - Printers on page
i / V e
OLUSON
M
ERVICE ANUAL
9-27.