Connection Of Auxiliary Devices; Ge Voluson I; Direction Kti106052, Revision; Service Manual - GE Voluson i BT06 Service Manual

GE
D KTI106052, R
IRECTION
Power Supplies for additional equipment MUST comply with IEC 60601-1. Auxiliary equipment
CAUTION
with direct main connection requires galvanic separation of the signal and/or control leads.
!! CAUTION:
WARNING WARNING DO NOT attempt to use different peripherals and accessories other than approved and
provided by GE!
!! WARNING:
Any unauthorized peripherals may cause system failure or damage!
After each installation, the leakage currents have to be measured according to
WARNING WARNING
IEC 60601-1 respectively UL 60601-1 (see:
!! WARNING:
Please observe that some printers may not be medical devices! If they are not medical devices,
CAUTION
they have to be located outside of the patient environment (acc. to IEC 60601-1 / UL 60601-1).
!! CAUTION:
NOTE: For more detailed Safety Considerations when connecting auxiliary devices to the Voluson i / Voluson
e system, please review:
3-24
10
EVISION
Chapter 1 - Auxiliary Devices Safety on page
Section 3-5 - Connection of Auxiliary Devices
Section 10-7-2 on page
1-10.
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
10-13).