Remote Control Selection - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
3-7-5

Remote Control Selection

To assign an auxiliary device (e.g., printer) to the remote keys PRINT A and/or PRINT B, or to adjust
Foot switch, etc.:
1.) On the control panel, press the UTILITIES key.
2.) In the "Utilities" menu on the left side of the screen select SYSTEM to invoke the setup desktop.
3.) Select the
VCR Source
Print A
• Remote Print A: Select the desired Printer for the remote control PRINT A key.
• Remote Print B: Select the desired Printer for the remote control PRINT B key.
NOTE: Optionally the Remote Control can be done by Foot switches.
Therefore select "Print A" or "Print B" in "Foot Switch Left" or "Foot Switch Right" - section.
• Report Printer: Select the desired Report Printer from the drop-down menu.
The selected Report Printer is usually used for printing reports and images from Sonoview.
NOTICE
!! NOTICE:
• Foot Switch Left/Right: Select desired function of the Foot switch Left and Right.
After adjustment, click SAVE&EXIT to save Settings and exit System Setup.
3-40
DRAFT (A
page.
PERIPHERALS
Figure 3-47 Peripherals page
Section 3-7 - Printer Installation
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
Foot Switch
Remote
Control
Report Printer
Print B
V (BT03)
M
ANUAL