GE Voluson i BT06 Service Manual page 395

GE
D KTI106052, R
IRECTION
8-19-9 Replacement of the Mounting Platform
8-19-9-1 Manpower
One person, 20 minutes
8-19-9-2 Tools
Phillips screwdriver 1
Torx screwdriver TX8
8-19-9-3 Preparation
1.) Power OFF/Shutdown the system as described in
2.) Disconnect and remove the Voluson i / Voluson e.
3.) Remove the Cover Bottom as described in
4.) Remove the Back Column Cover as described in
8-19-9-4 Mounting Platform - Removal Procedure
1.) Screw off the screw.
2.) Screw off the 4 Torx screws.
8-19-9-5 Mounting Platform - Installation Procedure
1.) Place the new Mounting Platform and fasten it with the screws.
2.) Mount the Back Column Cover as described in
3.) Mount the Cover Bottom as described in
10
EVISION
Figure 8-72 unscrew the screw
Figure 8-73 unscrew the Torx screws
Chapter 8 - Replacement Procedures
Section 3-6-3 on page
Section 8-19-4 on page
Section 8-19-5 on page
Section 8-19-5-5 on page
Section 8-19-4-5 on page
V i / V
OLUSON OLUSON
S M
ERVICE
3-72.
8-48.
8-49.
8-49.
8-48.
e
ANUAL
8-53