GE Voluson i BT06 Service Manual page 152

GE
D KTI106052, R
IRECTION
Install the UP-D897 printer software/driver (cont'd)
3-7-1-1
NOTE: If path (R:\system\....) is different from what is shown in
search correct driver.
R:\system\periph\SonyUP-D897
5.) Confirm the correct path and click NEXT to install the driver. All necessary files are copied.
6.) If the following Warning message appears, click CONTINUE ANYWAY.
7.) Confirm the installation by clicking FINISH to close the Hardware Wizard.
8.) Close all open windows and restart the system (turn off and on the system).
After boot up of the system, verify the correct settings in the printer "Properties", see:
NOTICE
"Adjustment of Printer Settings" on page
!! NOTICE:
3-82
10
EVISION
Figure 3-98 Search for Network path
Figure 3-99 Finish installation
Section 3-7 - Printer Installation
3-98, click on the BROWSE button to
Figure
verify correct path, otherwise [Browse] for
R:\system\periph\SonyUP-D897
3-91.
V i / V e
OLUSON OLUSON
S M
ERVICE ANUAL
Section 3-7-5