4.4 Backup and Restore Database, Preset Configurations and Images
It is highly recommended to Backup the Full System Configuration
Note
Image Archive
1.
Press the Utilities key on the control console.
2.
In the "Utilities" menu touch the
3.
On the left side of the screen select
1
Full System Configuration
2
Small Backup (Scan Settings)
The System Configuration page is subdivided in 2 main groups:
1.
Small Backup (Scan Settings)
-
"Save Small Backup (Scan Settings)" on page 4-30
-
"Load Small Backup (Scan Settings)" on page 4-31
2.
Full System Configuration
-
"Save Full System Configuration (Full Backup)" on page 4-34
-
"Load Full System Configuration (Full Backup)" on page 4-36
-
"Delete Full System Configuration (Full Backup)" on page 4-38
Settings and/or Full System Configuration can be saved to the following destinations:
•
D: partition of internal hard disk
•
DVD/CD+R/RW
•
Mapped Network Drive, see:
•
Any other drive connected to the system (e.g.; USB-Stick or external hard disk drive)
Note: This function is only available in the Full Backup utility. For further details review:
"General Remarks and Hints when using external USB-Devices" on page 3-38
Voluson E-Series Service Manual
KTD106657 Revision 2
(Section 4.4.6 on page 4-39
System Setup button to invoke the setup desktop on the screen.
Backup and then click the System Configuration tab.
Figure 4-21 System Setup - Backup - SYSTEM CONFIGURATION page
Section 3.13.3 on page 3-76
(Section 4.4.3 on page 4-34
) once a week.
.
Functional Checks
) and the
Section 3.4.15
.
4-29