Table of Contents
Advertisement
Setup
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Fig. 72: Changing the handwheel
(1) - Large handwheel
(2) - Hole
(3) - Screws
(4) - Pin
To change the handwheel:
1.
Loosen the screws (3).
2.
Remove the large handwheel (1).
3.
Position the small handwheel (5) above the pulley in such a
way that the pin (4) protruding on the inside of the handwheel
fits into the matching hole (2) in the pulley.
4.
Tighten the small handwheel (5) using the screws (3).
5.
Place the cover (6) and tighten it using the screws (7).
The handwheel has been changed.
①
②
③
④
⑤
⑥
⑦
(5) - Small handwheel
(6) - Cover
(7) - Screws
151
Advertisement
Table of Contents
