Table of Contents
Advertisement
Icon
Parameter
First bartack section
st
The 1
programmed with a different number of
stitches. All subsequent sections have
the preset number of stitches from the
settings for the start bartack.
Last bartack section
The last section of the bartack can be
programmed with a different number
of stitches. All previous sections have
the preset number of stitches from
the settings for the end bartack.
Invert bartack direction
Normally, a bartack starts either with
the sewing direction (forwards – even
number of sections) or against the
sewing direction (backwards – odd
number of sections), depending on
the number of sections.
Setting this parameter inverts the
sewing direction of the bartack.
90
section of the bartack can be
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Setting
On/Off
Number of stitches
Value range
01 - 50
On/Off
Number of stitches
Value range
01 - 50
Value range
On/Off
Programming
Advertisement
Table of Contents
