Table of Contents
Advertisement
Icon
Parameter
Gap (2
The 2
switched on using a button on the push
button panel or the tile on the control
panel.
Program Cycle
Next program
A subsequent program can be defined.
Input via program number.
Program Cycle
The program is executed as a loop,
which is useful, for instance, for
ornamental stitch seams.
You select the start segment and
the end segment from a program and
define how often you wish the selected
segments to be sewn.
Main Parameter
Needle thread clamp
The needle thread clamp is closed at
the 1
the needle thread lies on the underside
of the sewing material
Bobbin monitor mode
104
nd
value)
nd
value for the gap can be
st
stitch of the seam to ensure that
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Setting
Value range
01.0 – 45.0 [mm]
On/Off
Start Segment
Value range 00 – 30
(0 = the cycle starts with the first
segment)
End Segment
Value range 00 – 30
(0 = the cycle ends with the last
segment)
Repetitions
Value range 00 – 99
(0 = the cycle continues until the next
segment is activated manually)
Value range
On/Off
(see p. 107)
Programming
Advertisement
Table of Contents
