Table of Contents
Advertisement
Safety
Transport Use a lifting carriage or stacker to transport the machine. Raise the
Setup The connecting cable must have a power plug approved in the
Obligations
of the operator
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
2
Safety
This chapter contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Failure to do so can result in serious injury and property damage.
2.1
Basic safety instructions
The machine may only be used as described in these instructions.
The instructions should be available at the machine's location at
all times.
Work on live components and equipment is prohibited. Exceptions
are defined in the DIN VDE 0105.
For the following work, switch off the machine at the main switch
or disconnect the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading
Missing or faulty parts could impair safety and damage the
machine. Only use original parts from the manufacturer.
machine max. 20 mm and secure it to prevent it from slipping off.
relevant country. The power plug may only be assembled to the
power cable by qualified specialists.
Follow the country-specific safety and accident prevention regu-
lations and the legal regulations concerning industrial safety and
the protection of the environment.
9
Advertisement
Table of Contents
