Assembling The Tilt Sensor; Changing The Handwheel - Dürkopp Adler D669 Operating Instructions Manual

150

7.10 Assembling the tilt sensor

Fig. 71: Assembling the tilt sensor (1)
①
②
(1) - Sensor
The tilt sensor has been pre-assembled.

7.11 Changing the handwheel

The handwheel that ships with the machine is the large handwheel.
The large handwheel can be replaced with the included small
handwheel.
Important
When assembling the small handwheel, the included cover
must be positioned above the handwheel and tightened on
the machine.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
(2) - Magnet
Setup