Dürkopp Adler D669 Operating Instructions Manual page 196

Code Type
4931 Information Checksum error of the
6353 Error
5001 Information Incorrect class
5002 Information Incorrect class or machine
5003 Information Data version is too old
5004 Information Checksum is incorrect
6360 Information No valid data on external
6361 Information No external EEprom
6362 Information No valid data on internal
6363 Information No valid data on internal and
194
Possible cause
control
EEprom Timeout
ID connection error
EEprom (internal data
structures are not
compatible with the external
data storage device)
connected
EEprom (internal data
structures are not
compatible with the external
data storage device)
external EEprom (software
version is not compatible
with the internal data storage
device, emergency
operating features only)
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Remedial action
• Data transfer from control panel to control
• Switch off the control, wait until the LEDs
are off, check connection for machine ID,
and switch on control again
• Change class
• Perform reset
• Change class
• Perform reset
• Perform reset
• Perform reset
• Software update
• Connect machine ID
• Check machine ID connection
• Switch off the control, wait until the LEDs
have gone out, and then switch on the
control again
• Software update
• Check machine ID connection
• Switch off the control, wait until the LEDs
have gone out, and then switch on the
control again
• Software update
Troubleshooting