Dürkopp Adler D669 Operating Instructions Manual page 68

66
There are three ways to log in. The three options - including
the necessary settings in the software - are described below.
5.4.2.1 Logging in with username and password
Assigning a username and password
To assign a username and password:
1. Create a new user in User Management and assign this
user a username and password ( p. 62).
 The user can log in immediately with this login information.
Logging in with username and password
To log in with username and password:
1. Enter username and password.
2. Press .
 If the login information is correct, the user will be logged in.
5.4.2.2 Logging in with a USB key
Assigning a USB key to a user
To assign a USB key to a user:
1. Select a user in User Management or create a new user
( p. 62).
2. Press the item Login with USB-Stick.
 A new window opens.
3. Plug the USB key into one of the ports on the control panel.
4. Select the USB key you wish to assign to the user for login
purposes.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Programming