Table of Contents
Advertisement
86
Setting options Needle thread tension
Menu item Setting 1
linear
Needle thread tension
Value range 00 – 99
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
2.OnOff
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
2.On
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Setting options Sewing foot pressure
Menu item Setting 1
linear
Sewing foot pressure
Value range 00 – 20
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Programming
Setting 2
Maximum needle thread
tension reached at the
upper material thickness
limit.
Material thickness at which
the increase in needle
thread tension should start.
Material thickness up to
which the increase in
needle thread tension
should occur.
Material thickness from
nd
which the 2
needle thread
tension should be used.
Material thickness from
nd
which the 2
needle thread
tension should be used.
Setting 2
Maximum sewing foot pres-
sure reached at the upper
material thickness limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in
sewing foot pressure
should occur.
Advertisement
Table of Contents
