Setup
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
13. Connect the cable of the LED sewing light to the sewing
light transformer (12) as shown in the wiring diagram
(Appendix ( p. 203)).
14. Tighten the cover of the junction box (11) and lay the cables
neatly.
7.14 Assembling the CCEA sewing light
NOTICE
Property damage may occur!
Cable may sustain damage and impair the operation of
the machine.
Always lay the cables so as not to create any chafing or
pinching points.
The following is required for assembling the sewing light with table
clamp:
• Sewing light CCEA
• Junction box
Fig. 80: Assembling the CCEA sewing light (1)
①
(1) - Cover
To assemble the sewing light:
1.
Switch off the machine.
(2) - Arm cover
②
157