Setting The Segment Parameters - Dürkopp Adler D669 Operating Instructions Manual

Programming
Icon Parameter
Seam Parameter
Stitch length
Needle thread tension
Sewing foot pressure
Sewing foot stroke
Max. Speed
It is possible to reduce the maximum
sewing speed at this point.
The maximum sewing speed can be
set in the software at the Technician
level.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
5.6.5

Setting the Segment parameters

There are various options for setting the parameters in the
segment. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Setting
Value range
00.0 - 12.0 [mm]
(depending on the sewing equipment
and the subclass)
Value range
01 - 99
Value range
01 - 20
Value range
1.0 – 9.0 [mm]
Value range
0050 – 3800 [rpm]
(depending on subclass)
91